EasyManua.ls Logo

Furuno GP-32 - 5. DESTINATION; Setting Destination Options

Furuno GP-32
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. WAYPOINTS (MARKS)
17
Showing nearest waypoints by
distance, TTG and ETA
1. Press the [MENU] key once or twice to
open the menu.
2. Choose WAYPOINTS and then press the
[ENT] key.
3. Choose NEAREST and then press the
[ENT] key. The display should look
something like the one shown below,
listing waypoints in order of distance from
own vessel, from closest to furthest.
WPTS/MARKS (NEAREST)
KOBE : 10.0 nm 344°
002 : 20.0 nm 337°
003 : 25.0 nm 357°
004 : 40.0 nm 143°
005 : 50.0 nm 90°
006 : 60.0 nm 200°
007 : 70.0 nm 320°
WPTS/MARKS list (NEAREST) by distance
4. To display ETA and TTG for each
waypoint, press .
WPTS/MARKS (NEAREST)
KOBE : 1H00M 12:00
002 : 2H00M 13:00
003 : 2H30M 13:30
004 : 4H00M 15:00
005 : 5H30M 16:30
006 : 6H00M 17:00
007 : 7H00M 18:00
WPTS/MARKS (NEAREST) list by TTG to ETA
5. To return to the waypoint list by distance,
press .
6. Press the [MENU] key twice to close the
menu.
3.5 Erasing Waypoints
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ERASE and then press the [ENT]
key.
WAYPOINTS/MARKS?
ROUTES?
TRACK?
RESET TRIP? (6.40nm)
RESET ODO? (6.40nm)
GPS DATA?
MENU SETTINGS?
ALL BACKUP DATA?
ERASE
ERASE menu
3. The cursor is selecting
“WAYPOINTS/MARKS?”. Press the [ENT]
key.
ERASE WPTS/MARKS
[ALL?] CURSOR KOBE
MOB START 001
002 003 004
005 006 007
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ERASE WPTS/MARKS display
4. Choose the waypoint you want to erase.
Note: You cannot erase CURSOR, MOB
or START. To erase all waypoints, choose
ALL.
5. Press the [ENT] key. A screen showing
position and other particulars of the
waypoint selected appears.
NAME: KOBE
34°39.836'N MARK
135°12.059'E x
10-JAN-02 10:25D
TTG 02H00M ETA: 12:25
Quit?
ERASE?
Waypoint data
6. Press to choose “ERASE?” and then
press the [ENT] key.
7. Press the [MENU] key twice to finish.

Table of Contents

Related product manuals