7. OTHER FUNCTIONS
46
1st byte: Skip code '-' (Hyphen) = Skip
ON, Space code = Skip OFF
After 2nd byte: Waypoint name (fixed to
6 bytes)
Note: A route can contain max. 30 waypoints
and GPRTE sentence for one route data may
exceed 80 byte limitation. In this case, route
data is divided into several GPRTE
sentences (Max. 4 sentences). This value
shows the number of sentences route data
has been divided.
Route comment data format
$PFEC, GPrtc, xx, c----c <CR><LF>
12
Route comment data format
1: Route No. (01 to 51, 2 digits required)
2: Route comment (Max. 16 characters,
variable length)
The same characters of the comment for
waypoint comment can be used.
End of sentence
$PFEC, GPxfr, CTL, E <CR><LF>
End of sentence format
7.14 Language
English and other languages are available.
1. Press the [MENU] key.
2. Choose SYS SETUP and then press the
[ENT] key.
3. The cursor is selecting LANGUAGE.
Press the [ENT] key.
ENGLISH ESPANOL
FRANCAIS ITALIANO
PORTUGUES DEUTSCH
NEDERLANDS JAPANESE
TIENG VIET
Language options
4. Choose language desired and then press
the [ENT] key.
5. Press the [MENU] key once to return to
the main menu.
6. Clear all backup data as shown in
paragraph 8.7.
To Next Page
Loading...
