5
2. WIRING
All wirings are terminated at the rear of the equipment. DO NOT turn on the power until completing
all the wiring. For detailed information about NMEA 2000 wiring, see “Furuno CAN bus Network
Design Guide” (TIE-00170) on Tech-Net
.
12-24 VDC
NMEA 0183
(ex. GP-320B)
Radar Sensor or
PSU-012/013
To ship's ground
Video interface devices*
NMEA 2000 port
*Remove the cover to
access these connectors.
(See the next page.)
Radar Sensor
(two-way cable supplied with DRS),
HUB-101 (MOD-WPAS0001-030+),
etc.
NMEA 0183 equipments
(GPS plotter. Echo sounder,
External buzzer, etc.)
DVI-D*
AUDIO*
(L: Line out, R: Line in (future use))
USB port*
(Ver. 1.1, mouse, keyboard, etc.)
MJ-A3SPF0017-050ZC (MFD8)
MJ-A3SPF0018-050ZC (MFD12)
Ground wire
IV-8sq.
FRUDD-18AFFM-L180
External display
(MU-150C etc.)
DVI-D/D cable
5 m/10 m
: Standard supply
: Option
: Local supply
To Next Page
Loading...
Need help?
General
