1. INTRODUCTION
1-13
3. Rotate the Course control knob to select “1:” or “2:” then push the knob. The
choices available for each division are as follows:
4. Rotate the Course control knob to select nav data desired then push the knob.
5. Set other patterns similarly.
6. Press the MENU key four times to close the menu.
Page 1
XTE !
TTG
ETA
DATE
TIME
WIND TRUE*
WIND APPARENT*
VOLT
TRIP "
Page 2
AIR TEMP !
ATMOS PRESS
HUMIDITY
DEW POINT
Page 3
POS
COG
SOG
STW
TEMP
DPT
BRG
RNG
WPT "
RUDDER
DEVIATION
NAVPILOT-700: 1 of [1], [2]
NAVPILOT-711, 720: 1 of [2], [3]
NAVPILOT-700: 2 of [2], 1 and 2 of [3]
NAVPILOT-711, 720: 2 of [3], 1 and 2 of [4]
NAVPILOT-700: 1 of [4]
NAVPILOT-711, 720: 1 of [5]
COMPASS
RUDDER
HIGHWAY
WIND TRUE*
WIND APPARENT*
DEPTH
TEMP
ENGINE SPEED
Graphic display
* Shown when [SHIP’S CHARACTERISTICS]=sailboat
To Next Page
Loading...
