5. MAINTENANCE, TROUBLESHOOTING
5-7
5.4 System Data
The system data display allows you to confirm the equipment and drive system status.
To show this display, open the [SYSTEM MENU], select [SYSTEM DATA] then push
the Course control knob.
[INPUT VOLTAGE]: Voltage input to the NAVpilot.[CONTROLLER ID]: ID of the con-
troller that displays the system data.[DRIVE TYPE]: Drive type used with the NAVpi-
lot.[BYPASS/CLUTCH]: Presence or absence of bypass/clutch.[P/C TEMP]:
Temperature of processor unit / control unit. [MOTOR DRIVE CUR.]: Motor drive cur-
rent. Max. value is 25.0A.[BYPASS/CLUTCH CUR.]: Bypass/clutch current. Max. val-
ue is 3.0A.
INPUT VOLTAGE: 24.4 V
CONTROLLER ID: 2
DRIVE TYPE: REVERSIBLE 24V
BYPASS/CLUTCH: NOT PRESENT
P/C TEMP: 71.3
°F/91.1°F
MOTOR DRIVE CUR.: 10.0 A
BYPASS/CLUTCH CUR.: 0.0 A
To Next Page
Loading...
