4. HOW TO CUSTOMIZE YOUR NAVPILOT
4-10
[PASSWORD
FUNCTION]
Activates or deactivates pass-
word requirement. Select ON to
require a password to access
menus. If the password is entered
correctly, the menu becomes op-
erative and the option setting for
this item changes to OFF.
[ON], [OFF]
[RECEIVE
SCREEN]
For multiple control units, you can
copy the settings of one control
unit to another. When you receive
settings from a control unit of a
different size than own, the fol-
lowing rule applies:1DIN
2DIN
1BOX 2BOXES 2BOXES
3BOXES
[NO], 1-6 (actual number de-
pends on number of control
units connected)
[SAVE USER SET-
TINGS]
Save current settings as user de-
fault settings.
[NO], [YES]
[LOAD USER SET-
TINGS]
Load user default settings. The
equipment is automatically re-
started to restore saved user set-
tings.
[NO], [YES]
[SAVE DISPLAY
SETTINGS]
Save all display-related settings. [NO], [YES]
[LOAD DISPLAY
SETTINGS]
Load currently saved display-re-
lated settings.
[NO], [YES]
[ALARM LOG] Show the alarms generated. See
section 3.13.
[SIM/DEMO] Activate and deactivate the dem-
onstration mode. DO NOT use
this function on board your boat; it
is intended for use by service
technicians. "SIM" appears at the
top right corner when the simula-
tion mode is enabled.
[OFF], [DEMO SLIDE
SHOW], [SIMULATOR],
[SIM W/DRIVE].
[DIAGNOSTIC] Perform various diagnostics on
the NAVpilot system. See
section 5.3.
[DISPLAY DATA
SELECT MENU]
Set and select the data to show in
the STBY, AUTO, NAV, WIND,
and FISH HUNTER modes. See
page 1-11 for the procedure.
[SYSTEM DATA] Show system data. See
section 5.4.
Item Description Options
To Next Page
Loading...
