2. OPERATION
2-4
2.4 Menu Overview
The main menu can be password protected. For information on how to access and op-
erate the main menu, see section 1.6.1.
For the sake of brevity, the following terminology is used in this manual:
Note: The default operation mode for the SC-70/SC-130 is [MERCHANT] (IMO com-
pliant). [FISHING] is not compliant with the IMO regulations and must not be used for
vessels which are required to be IMO compliant. To change the operation mode, con-
sult your local dealer.
1. Press the MENU ESC key to open the menu.
2. Press S or T to select a menu item, then press the ENT key.
"X" next to a menu item indicates that there is a sub-menu available.
3. Press the MENU ESC key to close the menu.
Terminology Meaning
"Select" Example: "Select [SENSOR], then press the ENT key."
Use the Cursorpad to select the menu item.
"Open the
[MENU]."
Press the MENU ESC key; this opens the [MENU].
"Close the
[MENU]."
• Press the MENU ESC key; this closes the [MENU] and re-
turns to the last used display screen or sub-screen.
• Press the DISP key; this closes the [MENU] and returns to
the main screen.
IMO type SC-70 or SC-130 systems which have been assigned as
[MERCHANT] at installation and installed on vessels which
meet the applicable IMO standards.
Non-IMO type SC-70 or SC-130 systems which have been assigned as
[FISHING] at installation and installed on vessels which do not
meet the applicable IMO standards.
Main menu.
Selection is highlighted. In this example,
[
DISPLAY
]
is selected.
Selected menu’s contents.
In this example, the
[
DISPLAY
]
menu’s contents are shown.
“►” inidicates there is a
sub-menu available.
Operational guidance.
To Next Page
Loading...
