2. WIRING
2-12
Basic plotter/radar/fish finder installation
This is a single station plotter/radar/fish finder installation. Connection of multiple sen-
sors, such as DFF3 and DRS series, requires the optional Ethernet Hub HUB-101. Al-
so, the power supply unit PSU-012, PSU-013 or PSU-017 is required for the
connection with DRS.
Network
Sounder
DFF3
Low
Freq.
Transducer
High
Freq.
DFF3
NETWORK SOUNDER
ST-BY
NMEA DATA
CONVERTER
IF-NMEA2K2
GPS RECEIVER
GP-330B
TZT9/14
12 VDC
CAN bus backbone cable
DFF3
NETWORK SOUNDER
ST-BY
Radar Sensor
DRS2D/DRS4D
Power Supply Unit
PSU-012/013/017
12-24 VDC
HUB-101
*
Cable from
GP-330B
Cable from
IF-NMEA2K2
CAN bus
drop cable
LAN cable (supplied,
MOD-WPAS0001-030+)
3 m
Two-way cable
(MOD-ASW0001)
LAN cable
(MOD-Z072)
12-24 VDC
12-24 VDC
12/24 VDC
*: For TZT14, the HUB-101
is required when four or
more network equipment
are connected to TZT14.
(For PSU-017)
To Next Page
Loading...
