3-1
3. SETTING UP THE EQUIPMENT
This chapter shows you how to set up your system according to the equipment you
have connected. You can do almost all operations on this equipment by just touching
the display, following the instructions below.
Touch control description
The touch control depends on the screen type. The basic operations to use at the in-
stallation setting are in the following table.
Operation by a finger
Operation by two fingers
Note: When both Rotokey
TM
and touch control are available for the same function,
this manual states the operation by touch control.
Operating by a finger Function
Tap • Select a menu item.
• Select an object.
• Display the pop-up menu.
Drag • Scroll the menu.
Operation by two fingers Function
Pinch Change the radar range.
Zoom in
Zoom out
To Next Page
Loading...
