Furuno TZT14 - Page 26

3. SETTING UP THE EQUIPMENT
3-4
4. Select time difference between local time and UTC time to use local time from the
pull-down list.
5. Select [Language] to show its option window.
6. Select the language to use.
7. Drag the main menu to select [Units], and set the units to show on the display.
[Menu Units] sub menus
Menu item Options
[Bearing Display] [True], [Magnetic]
[True Wind Calculation
Reference]
[Ground], [Surface]
[Position Format] [DDD°MM.mmmm’], [DDD°MM.mmm’], [DDD°MM.mm’],
[DDD°MM’SS.ss”], [DDD.dddddd°], [Loran C], [MGRS]
[Loran C Station & GRI] [GRI] Select GRI code.
[Master] -
[First (Second) Slave] X: Upolu Point, Y: Kure Island
[Correction First (Second)
Slave]
Enter a position offset to refine Loran C
position.
[Range (Long)] [Nautical Mile], [Kilometer], [Mile]
[Range (Short)] [Foot], [Meter], [Yard]
[Short/Long Change Over] Set the distance at which to change between short and long range. Set
the long range here.
[Depth] [Foot], [Meter], [Fathom], [Passi Braza]
[Height/Length] [Foot], [Meter]
[Temperature] [Fahrenheit Degree], [Celsius Degree]
[Boat Speed] [Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
[Wind Speed] [Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
[Atmospheric Pressure] [HectoPascal], [Millibar], [Millimeter of Mercury], [Inch of Mercury]
[Oil Pressure] [KiloPascal], [Bar], [Pound per Square Inch]
[Volume] [Gallon] (Gallon & Gallon/hour), [Liter] (Liter & Liter/hour)
[Reset Default Settings] Restore default unit settings.
UTC -06:00
UTC -05:00
UTC -04:00
UTC -03:00
UTC -02:00
Local Time Offset
UTC -06:00
English (United States)
5.0 knManual Demo Speed
Language
Check for Software Update
Reset Default Settings
Reset
Update