1. MOUNTING
1-3
5. Set the TZT9/14 to the cutout.
6. Fasten the flush mount fixtures to the holes for the hanger at both sides of TZT9/
14 with two hex. bolts (M8x15, supplied).
7. Fasten each wing bolt so that the protector for screw touches the mounting panel.
8. Fasten the wing nuts tightly.
TZT9/14 with a fixing panel, top view
Flush mount fixture
Holes for the hanger
Hex. bolt (M8x15)
Mounting panel
Flush mount fixture
Wing bolt
Wing nut
Protector for screw
To Next Page
Loading...
