10. CAMERA/VIDEO/EXTERNAL EQUIPMENT
10-4
Nickname: If desired you can change the name of the IP camera(s). The default
names are [IP CAMERA 1], [IP CAMERA 2], [IP CAMERA 3], [IP CAMERA 4]. You
can use a maximum of 20 characters. To change a name, tap [NickName] to show the
software keyboard. Change the name, then tap [] to finish. The name is reflected to
the following locations.
• The name that appears at the bottom right corner of the camera display.
• Pop-up menu that appears when you tap the camera display.
IP Camera: Enter the IP address of the IP camera, using the software keyboard. Tap
[] to finish.
PTZ Control: Turn this item on to enable PTZ (Pan, Tilt, Zoom) control of the camera.
To Next Page
Loading...
