Fusion MS-IP700 - Parental Mode; Entering Parental Menu; Changing Access Code

51
Category
You can use the Category menu item to control which categories of
channelsareavailable(Rock,forexample)whenyouareusingtheCategory
tuningmethod(see“TuningMethods”onpage16.
To select a Category:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectCategory.
3. Do one of the following:
• ToenabletheCategoryTuningmethod,turnandthenpresstheEncoder
toselecttherequiredcategoryname,“Rock”forexample:
The Sirius Source Screen is displayed with the
Tuning mode indicator set to ‘Category’.
Special icons
When you select a channel in the channels list you may see two
different icons at the right hand side of the list.
• Thepadlockiconmeansthechannelislockedorconsidered
mature content. If you select this channel you will be asked to
unlock parent mode, if it is not already unlocked.
• Thegreenarrowiconmeansthechannelhasbeensetuptobe
skipped when using the Forward and Backward keys in the Sirius
SourceScreen.However,youcanalwaysaccessaskipped
channel via this channel list.