What to do if SiriusXM message ‘No Signal’ appears on my Fusion MS-IP700 Entertainment System?
If you see a ‘No Signal’ message on your Fusion Entertainment System when using SiriusXM, check the following: * Ensure the antenna is not damaged. * Ensure the antenna has a clear view of the sky and is not obstructed. * Ensure the antenna cable has not been damaged.
What to do if SiriusXM message ‘Check Antenna’ appears on my Fusion MS-IP700 Entertainment System?
If your Fusion Entertainment System displays the SiriusXM message ‘Check Antenna’, try these steps: * Ensure the antenna is securely plugged into the SiriusXM Tuner module. * Check that the antenna itself is not damaged. * Verify that the antenna cable is also free from damage.
What to do if SiriusXM message ‘Check Tuner’ appears on my Fusion MS-IP700 Entertainment System?
If your Fusion Entertainment System displays the SiriusXM message ‘Check Tuner’, check the following: * Ensure the SiriusXM module is properly plugged into the MS700. * Ensure the SiriusXM cable is not damaged.
What to do if my Apple Device has gone into thermal protection with Fusion MS-IP700 Entertainment System?
If your Apple iPhone or iTouch shuts down due to exceeding the operating temperature, carefully remove it from the MS-IP700 and allow it to cool down before using again. The internal dock temperature of the MS-IP700 will be slightly higher than the ambient temperature outside the head unit.
How to fix Fusion MS-IP700 when the unit does not respond to key presses?
If your Fusion Entertainment System does not respond to key presses, reset the unit by pressing the Reset button inside the control panel door.
What to do if my iPod/iPhone will not connect to the Fusion MS-IP700 Head unit while in the dock?
If your iPod/iPhone will not connect to the Fusion Entertainment System Head unit while in the dock, check the following: * Verify that you are using the correct sleeve combination, as an incorrect combination could prevent the iPod connector from mating correctly. * Ensure that you have the latest version of operating software installed on your iPod/iPhone and the latest iTunes version.
What to do if my FUSION-Link Wireless application displays “No stereo available”?
If your FUSION-Link Wireless application displays “No stereo available”, check that you are connected to the correct wireless network for the 700 series. Once you have confirmed this, close the App on the device and restart it.
General| Water Resistance | IPx5 |
|---|---|
| Bluetooth | Yes |
| Radio | AM/FM |
| USB Input | Yes |
| Aux Input | Yes |
| iPod/iPhone Compatibility | Yes |
| NMEA 2000 | Yes |
| Ethernet | No |
| Display | LCD |
| Type | Marine Entertainment System |
| Power Output | 70W x 4 |
| Weight | 4.4 lbs |
Overview of the physical layout and components of the control panel.
Explanation of the function of each button on the unit's control panel.
Details the three ways the rotary encoder can be used for control.
Explains how to use the menu key to open, save, and exit menus.
Instructions on how to turn the marine entertainment system on and off.
Overview of the different input source types supported by the unit.
How to mute and unmute the audio output of the system.
How to adjust Bass, Middle, and Treble settings for all zones.
Instructions on how to display and set the current time.
Procedure for setting a timed alarm to turn the unit on.
Procedure for disabling or removing a previously set alarm.
How to adjust the brightness level of the display screen.
How to select and listen to AM, FM, or VHF radio broadcasts.
Description of the display screens for AM, FM, and VHF sources.
Methods for manually tuning to frequencies or channels.
Methods for automatic station searching and scanning.
How to tune to saved radio station presets.
Steps to save current radio stations as presets for quick recall.
Procedure to remove saved radio station presets from the unit.
Using the Squelch feature to reduce noise on VHF input.
Enabling scan mode to find active VHF channels.
How to connect and play music from an iPod.
Description of the iPod playback display interface.
How to navigate and select music tracks from an iPod playlist.
Adjusting repeat modes and shuffle playback options for iPod.
Configuring search technology and subtitle display for iPod.
How to connect and play music from a USB flash drive.
Description of the USB flash drive playback display interface.
How to navigate and select audio tracks stored on a USB drive.
How to connect and play audio from external auxiliary devices.
Description of the display screen for auxiliary input sources.
Control entertainment systems via multi-function displays.
Integrate audio control with marine data networks.
Details the features of the wired remote control unit.
Enables wireless control via Ethernet and compatible apps.
Explains NMEA2000 and FUSION-only installation for wired remotes.
Details how IR remote keys correspond to head unit functions.
Specific keys on IR remote for DVD, iPod, and USB playback.
Provides physical dimensions and mounting considerations for installation.
Connect an AM/FM marine antenna to the unit.
Connect an auxiliary audio source via RCA sockets.
Connect composite video output to a TV/monitor.
Connect USB devices to the MS-AV700 model.
Connect NMEA2000 or wired remote controls.
Connect the unit to a DHCP Ethernet Router.
Connect to a SiriusXM Connect Vehicle Tuner.
Details speaker and line out connections for different zones.
Guidance on wiring the unit for a 12V DC Negative ground system.
Configure and manage audio zones, including volume limits and naming.
Enable or disable volume control for Zones 3 and 4.
Link Zone 2 levels to Zone 1 for synchronized adjustments.
Specify the audio balance for each selected zone.
Set volume limits to prevent excessive noise levels in specific zones.
Adjust sub-woofer levels for all zones from a single screen.
Assign custom names to each zone (up to 10 characters).
Guidance on connecting and using an iPod with the unit.
Guidance on connecting and using a USB flash drive with the unit.
How to connect an external audio device to the AUX IN port.
How to adjust the input gain for auxiliary sources for optimal volume.
Instructions on setting the unit's internal clock.
How to select between 12-hour and 24-hour clock display.
Steps to activate the SiriusXM tuner for service reception.
Navigating SiriusXM menus for channels, categories, and parental controls.
Procedure to unlock and access parental control features.
How to change the 4-digit access code for parental controls.
Locking or unlocking specific channels for restricted access.
Setting channels to be skipped during navigation.
Control subwoofer cutoff frequency for audio signals.
Enable or disable the audible beep for key presses.
Select the desired display language for menus and screens.
Enable power saving to reduce battery drain by dimming the screen.
Configure action when connected to a cellphone hands-free kit.
Select the correct region for FM/AM tuner reception.
Select the correct region for VHF tuning.
Turn AM or VHF tuner sources on or off.
Restore all unit settings to their original factory default values.
Troubleshooting unit responsiveness and physical condition issues.
Solutions for SiriusXM screen display, tuner, antenna, and signal problems.
Resolving lock-ups, connection failures, and thermal protection issues with iPod/iPhone.
Troubleshooting FUSION-Link app connectivity and stereo detection problems.
Details FCC compliance rules and operating conditions for the device.
Provides operating voltage, fuse rating, and power output details.
Details laser power for the DVD player component.
Specifies input sensitivity for the auxiliary audio input.
Lists FM and AM radio frequency ranges for different regions.
Specifies FM and AM radio frequency ranges for the USA.
Specifies FM and AM radio frequency ranges for Japan.
Details the frequency range for VHF tuning across all regions.
Information on iPod, iPhone, SiriusXM, and NMEA2000 certifications.
Contact details for FUSION Electronics support in various regions.
To Next Page
