Fusion MS-IP700 - Channel Locking;Unlocking; Channel Skipping; Advanced Settings

53
3. Entertheold(current)accesscodebyturningtheEncodertochangethe
highlighteddigit,thenpresstheEncodertoselectthenextdigit.Whenyou
have entered all four digits correctly, you will be prompted to enter the
new access code.
4. EnterthenewaccesscodebyturningtheEncodertochangethe
highlighted digit, thenpresstheEncodertoselectthenextdigit.Whenyou
have entered all four digits correctly, you will be prompted to enter the
new access code for a second time.
5. PresstheMenukey(orleavetotimeout)tosavethenewcodeandexit.
Channel Locking / unlocking
Anychannels(notjustmaturecontentchannels)canbelocked.Locked
channels cannot be seen in the Sirius Source Screen or when changing
channels with the Forward and Backward keys. Locked channels can be
accessed in parental mode only.
To access a locked channel:
1. Press the Menu key.
2. Do one of the following:
a. TurnandthenpresstheEncodertoselectParental > Unlock.
OR
a. TurnandthenpresstheEncodertoselectParental > Channels.
b. Tunetothechannelyourequire.Thischannelwilldisplaya
padlock icon, to the right of the screen.
3.Enteryouraccesscode.
4. Press the Menu key to return to the Sirius Source Screen.
To lock or unlock a channel:
1. Press the Menu key.