Fusion MS-IP700i

52
Tel mute
Use this option to control which action is taken when the 700 Series is
connected to a cellphone hands-free kit.
To change the Tel mute setting:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectSettings > Tel mute.
3. TurntheEncodertoselecttherequiredoption:
• Mute. Mutes the audio output from the 700 Series when a call is
received on your cellphone.
• Aux. Allows the received call to be broadcast through the Auxilary input
on the 700 Series.
Note: This feature may not operate all available hands-free kits. Hands free
kit must be connected to the TELMUTE input and
AUX input.
4. PresstheRotaryEncodertosavethesettingandexit.
5. Press any key to exit
Tuner region
Use this option to select the correct region .
To change the tuner region setting:
1. Press the Menu key.
2. TurnandthenpresstheRotaryEncodertoselectSettings > Tuner region.
3. TurntheRotaryEncodertoselecttherequiredregion.
4. PresstheRotaryEncodertosavethesettingandexit.
5. Press any key to exit
VHF region
UsethisoptiontoselectthecorrectVHFtuningregion.Pleaserefertothe
specifications section for additional channel information.
To change the VHF region setting:
1. Press the Menu key.
2. TurnandthenpresstheRotaryEncodertoselecttheSettings > VHF region.
3. TurntheRotaryEncodertoselecttherequiredregion.
4. PresstheRotaryEncodertosavethesettingandexit.
5. Press any key to exit
Sources
UsethisoptiontoturntheAMorVHFtunersourceonoroff,ifrequired.This
isusefulifyouonlylistentoFManddonotwishtostepthroughAMandVHF
when selecting a tuner source.
The Sources option also enables you to select a name for AUX input and
configure the shared SiriusXM/Bluetooth input source.