RECEIVER FP-R129DP
• Extremely quick response, high resolution, and
high reliability are achieved with a newly-
developed, low voltage PCM decoder.
• RF amplifier and monolithic IF amp designed
for high sensitivity.
•Dual
conversion
"1991"
design
with
ultra
narrow-band ceramic filter is immune to ad-
jacent band interference (cross modulation
interference, mutual modulation interference)
and spark noise.
• Fail Safe and Battery Fail Safe functions
provide greater safety and reliability.
•Servo Hold function eliminates "glitches"
during momentary signal losses or strong inter-
ference.
• Gold-plated connector pins provide positive
contact.
• DSC System: Operation of all servos is possible
without turning on the transmitter by connect-
ing the accessory cord directly to the C termi-
nal of the receiver.
SERVO FP-S9101 +S5101
• High torque and high speed water-and dust-
proof
servo
with
highest-quality
coreless
motor.
<FP-S9101> Output torque 3.1 kg-cm (69.5
oz.-in.). Operating speed 0.16 sec/60°. <FP-
S5101> Output torque 4.0 kg-cm (55.6
oz.-in.). Operating speed 0.24 sec/60°.
• New indirect drive potentiometer improves
vibration and shock resistance and neutral
precision tremendously.
• Futaba custom 1C provides high starting
torque, narrow dead band, and excellent
trackability. Neutral holding force is also im-
proved substantially.
• Fiberglass reinforced PBT (polybutylene
terephthalate) molded servo case is mechanical-
ly strong and invulnerable to glow fuel.
• Strong polyacetal resin, ultra precision servo
gears ensure smooth operation, positive neu-
tral, and minimal backlash.
• Fiberglass reinforced epoxy resin PC board
with thru-the-hole plating improves reliability
against shock and vibration.
• Seven special adjustable splined output arms.
2]
To Next Page
Loading...
