RESET
The RESET function can be used to return programmed data to the original factory set-
tings. Certain functions can be reset individually (Items 1—7 below), or all data can be reset
in a single operation (Item 8).
Functions to be Reset:
1.
REV,
F/S
5.
MIX
2. ATV 6.TRM
3.
AFR 7. PAR
4.
D/R,
EXP
8.
ALL
ALL resets Items 1 through 7 simultaneously.
Setting Method
1) Select the EDIT screen and move the cursor
to Line 3 with the cursor key, then press
the program key.
2) Move the cursor to the Item No. to be reset
cursor
or
with the
keys.
3)
Press
the
program
key.
A
message
will
appear asking if the data is to be reset.
4) To complete the RESET operation, press the
program key. To cancel the operation,
press the key.
[49]
To Next Page
Loading...
