FUTABA T3PK

39
Functions
Steering Speed (ST-SPEED) adjustment
(Preparation)
- Select setup item "TURN" and make the following ad-
justments:
1 "TURN" direction adjustment
Use the (+) and (-) buttons to adjust the delay
amount.
2 3rd channel servo (down side) adjustment
Press the (DN) button and select setup item "RE-
TURN" and use the (+) and (-) buttons to adjust
the delay amount.
3 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Setup item switching
- Use the (DN) or (UP) button to switch
the setup item.
 


Setting range: 1~100%
At 100%, there is no delay.
At 1%, the delay is approximately 1.5
seconds.
Servo operation is delayed.