Futurecom P25 - Page 69

8M083X25 R14
APX Series P25 Interface
DVRS Installation & Programming Guide – PART II
January 2019
Page 69 of 153
Field Name
Options
/ Units
Description
Notes
Steering in
Emergency
Yes
No
Default setting is ‘No’ (Disabled).
When steering in emergency is
Disabled, the DVR suspend
steering until the emergency is
cleared. The DVR disregards the
programmed RX PL/DPL and
repeats all traffic to the System.
If enabled (set to ‘Yes’) the VR
steering does not change when
emergency has been declared.
Applicable to Analog DVR Modes
only.
Steering Revert
Yes
No
Enables (‘Yes’) or Disables (‘No”)
MSU revert to the originally
selected zone/channel after the
steering inbound call is complete
and the Steering Hang Timer has
expired.
Applicable to Analog DVR Modes
only.
UID Translation
Yes
No
Enables (‘Yes’) or Disables (‘No”)
DVR shall replace the PSU’s
source ID and TG with MSU’s ID
and MSU’s TG
The <Unit ID Translation> feature
is supported on digital DVR
channels only.