FXP CD-220 VFD - Command Type Setting Command; International Character Set Setting Command

SOFTWARE SETTING COMMAND
Customer Pole Display CD-220 VFD 18
5.3 Command Type Setting Command
STX 05 C n ETX Change the command type
ASCII Format
STX 05 C n ETX STX 05 E N ETX
Dec. Format
[02][05][67] n [03] [02] [05] [69] [78] [03] n=49,51,55
Hex. Format [02h][05h][43h] n [03h][02h][05h][45h][4eh][03h]
n=31h,33h,37h
Description Change the command type and initialize the display
n Command type n Command type
31h ESC/POS 35h UTC/P
32h ADM787/788 (option) 36h UTC/S
33h DSP-800 (option) 37h CD5220
34h EMAX (AEDEX)
5.4 International Character Set Setting Command
STX 05 S n ETX Change the International character set
ASCII Format
STX 05 S n ETX STX 05 E N ETX
Dec. Format
[02][05][83] n [03] [02] [05] [69] [78] [03] 48≦n≦63
Hex. Format [02h][05h][53h] n [03h] [02h][05h][45h][4eh][03h]
30h≦n≦3Fh
Description Change the display International character set
n
Character Set
(20h–7Fh)
Code Table (80H-FFH)
30h U.S.A. PC-437 (USA, Standard Europe)
31h France
PC-858
32h Germany
33h U.K.
34h Denmark I
35h Sweden
36h Italy
37h Spain
38h Reserved
39h Norway PC-858
3Ah Denmark II
3Bh U.S.A. Slavonic
3Ch U.S.A. Russia
3Dh U.S.A. PC-860 (Portuguese)
3Eh U.K. Greek
3Fh User Font