FXP CD-220 VFD - Chapter 6 Command Set; ESC;POS Mode Command Set

COMMAND SET
19 Customer Pole Display CD-220 VFD
CHAPTER 6 COMMAND SET
6.1 ESC/POS Mode Command Set
Command Code (hex) Function description
HT 09 Move cursor right.
BS 08 Move cursor left.
US LF 1F 0A Move cursor up.
LF 0A Move cursor down.
US CR 1F 0D Move cursor to right-most position.
CR 0D Move cursor to left-most position.
HOM 0B Move cursor to home position.
US B 1F 42 Move cursor to bottom position.
US $ x y 1F 24 x y
01h≦x≦14h, y=01h, 02h
Move cursor to specified position.
CAN 18 Clear cursor line.
CLR 0C Clear display screen.
US X n 1F 58 n
01h≦n≦04h (=brightest)
Brightness adjustment.
US E n 1F 45 n
00h≦n≦FFh
Blink display screen.
ESC @ 1B 40 Initialize display.
ESC # n 1B 23 n
30h≦n≦38h
Command type select
ESC R n 1B 52 n
00h≦n≦0Ch
Select international character set.
(see Table 5-A)
ESC t n 1B 74 n
n=00h, 01h..07h, 10h, 13h
Select character code table.
(see Table 5-B)
US r n 1F 72 n
n=00h, 01h
Select/Cancel reverse character.
n=01 select, n=00 cancel
US # n m 1F 23 n m
n=00h, 01h, 01h<m≦14h
Turn annunciator on/off
n=01 on, n=00 off
US C n 1F 43 n
n=00h, 01h
Set cursor on/off
n=01 on, n=00 off
US MD1 1F 01 Specify overwrite mode.
US MD2 1F 02 Specify vertical scroll mode.
US MD3 1F 03 Specify horizontal scroll mode.
US @ 1F 40 Execute self-test.