G.S.I DC Installation and Operation Guide
8
3. For the internal casing on the right side, unscrew the two screws
and open the casing (Figure 3). Mount the controller to the wall or
to the control cupboard through the marked holes (Figure 4 and
Figure 5) with the aid of three screws. Close the screws by hand
only.
4. Close the internal casing and fasten its screws.
5. Swing the control panel back into place.
6. Close and lock the controller cover.
Figure 6: Open Controller Cover
Figure 7: Control Panel Swung
Outward
To Next Page
Loading...
