SmartScale 300 User Manual
Page 17
Zero tracking
As animals pass through the weighing crate, an accumulation of mud
and dung may build up on the weighing platform. The Scale can
compensate for the weight of this accumulation by subtracting it from
the total weight. The automatic subtraction of the residual weight
from the total weight is called zero tracking.
Zero tracking ensures that the Scale captures the animal's weight and
not the mess left on the platform.
The way zero tracking is initiated depends on the weighing mode.
Automatic and manual modes
In the Automatic and Manual weighing modes, zero tracking is
automatically implemented if, after the animal leaves the weighing
platform, the residual weight is within a defined zero tracking range.
If the residual weight is within the defined range, the icon
displays.
If the residual weight is outside the defined range, the icon does
not display.
To manually compensate for the residue, press the blue zero
button. The
icon displays.
During a weighing session, if the Scale consistently does not restore to
zero, check that there are no obstructions under or around the platform
or crate.
Fine mode
In the Fine weighing mode, automatic zero tracking is disabled.
The
icon does not display in the Fine weighing mode.
To Next Page
Loading...
