SmartScale 300 User Manual
Page 7
The mode select switch
The Scale can operate in three weighing modes and a setup mode.
The mode select switch is located on the left hand side of the Scale.
The mode select switch has five positions:
, A, M, F and S.
Immediately after you turn the switch to any position except
,
explanatory information will display on the lower of the two Scale
screens. The explanatory information will display only for a few
seconds; after it disappears, the screen displays information relevant to
the selected option.
This position turns the Scale off.
A
This position selects automatic weighing. After the mode
select switch is first turned to A, the following information
briefly appears.
Automatic weighing is covered under Weighing animals -
automatic or manual modes.
M
This position selects manual weighing. After the mode select
switch is first turned to M, the following information briefly
appears.
To Next Page
Loading...
