SmartScale 300 User Manual
Page 23
Static loads
Delete the weight after the load has been removed from the
platform
This feature is available when the Scale is set to the Fine mode.
After the static load has been removed from the platform and before
another load is placed on the platform, you have an opportunity to
delete from the statistics the weight just captured.
To delete the weight, press the red delete button.
The last captured weight will be removed from the statistics and the
lower screen will briefly display the following message.
Note:
You can only delete the last weight captured from the statistics.
Weights captured prior to the last cannot be removed by pressing the
delete button again.
To Next Page
Loading...
