Configuration
Computer and console modules · 209
How to show status information in the OSD:
1. Press the Alt+Num (default) hotkey to open the OSD.
2. Select Information and press Enter.
3. Use the arrow keys to select the desired menu item (see above).
4. Press Enter to show the desired information.
5. Press Esc to leave the menu.
HOTKEY
Local Hotkey (Modifier+Key)
Modifier: Modifier key of key combination
Key: Hotkey of key combination
Local OSD via 2x keypress
Modifier: Configured key to oprn the on-screen display via double keypress
Local selectkeys
Keys: Selected set of select keys:
HARDWARE INFORMATION
Serial number: Serial number of console module
To Next Page
Loading...
