Computer module »VGA-CPU-UC«
Computer and console modules · 89
Installation
Connecting the computer
Keyb.: Use the purple plug of an optional Twin-PS/2 cable to connect the computer’s
PS/2 keyboard interface to this interface.
Mouse: Use the green plug of an optional Twin-PS/2 cable to connect the computer’s
PS/2 mouse interface to this interface.
USB K/M: Use the USB device cable to connect one of the computer’s USB interfaces
to this interface.
VGA CPU: Use the supplied video cables to connect the computer’s analogue video
output to this interface.
Line In: Use one of the supplied audio cables to connect the computer’s Line Out
interface to this interface.
Line Out: Use one of the supplied audio cables to connect the computer’s Line In inter-
face to this interface.
Connections to the matrix switches
NOTE:
Keyboard and mouse signals can be transmitted to the computer using either
the PS/2 interfaces or the USB interface.
IMPORTANT:
Connect only one of the computer module’s Trans. interfaces for
each matrix switch!
NOTE:
Only use category 5e (or better) twisted pair cables to connect the devices.
Power
Trans. 1
Trans. 2
Service
Line In
Line Out
Power In
To Next Page
Loading...
