IDL 101
FUNCTIONAL DESCRIPTION
52
HB_IDL101_E_V222.doc
Gantner Instruments Test & Measurement GmbH
6.7. Threshold Values
The user can preset the conditions for process-controlled digital status output on the data logger and for the output of
an alarm signal via bus. This is carried out by means of the
Configuration Software ICP 100
.
6.8. Error Handling
The
Datalogger IDL 101
can independently detect certain defects, which are consequence of a line break, short circuit,
or communication interrupt for example. For these defects the user can preset a certain behavior for the module via the
Configuration Software ICP 100
.
As a standard the current status of the sensor module is maintained in case of error/defect.
To Next Page
Loading...