Gantner IDL 101 - Digital Inputs;Outputs (6 Per Module)

IDL 101
SPECIFICATION
88
HB_IDL101_E_V222.doc
Gantner Instruments Test & Measurement GmbH
11.6. Digital Inputs/Outputs (6 per Module)
as Input:
□ Function: Status, frequency, counter
□ Input voltage: max. +30 VDC
□ Input current: max. 1,5 mA
□ Input frequency: max. 2 kHz (I/O 01 .. I/O 06)
max. 100Hz (I/O 01 .. I/O 16)
□ Logic state: Low-Active
□ Threshold low: > +3,5 VDC (“0“)
□ Threshold high: < +1,0 VDC (“1“)
as Output:
□ Function: Host out, process out
□ Output voltage: max. 30 VDC
□ Output current: max. 100 mA
□ Output frequency: max. 100 Hz
□ Output state: Open collector
11.7. Interfaces
□ Base: RS 485, RS 232
□ Data format: adjustable 8E1 / 8N1
□ Protocol: ASCII,
PROFIBUS according to DIN 19245, part 1
MODBUS according to PI-MBUS-300 Rev.D
□ Baud rate ASCII: 2.400 / 4.800 / 9.600 / 19.200 / 38.400 bps
□ Baud rate Modbus: 2.400 / 4.800 / 9.600 / 19.200 / 38.400 bps
□ Baud rate PROFIBUS: 9.600 / 19.200 bps
11.8. Operating Conditions
□ Ambient temperature: -30 to +60 °C
□ Storing temperature: -40 to +85 °C
□ Humidity: 0 to 95 % at +50 °C, non condensing