IDL 101
SPECIFICATION
HB_IDL101_E_V222.doc
89
Gantner Instruments Test & Measurement GmbH
11.9.
Electromagnetic Compatibility
The
Datalogger IDL 101
meets the protection requirements of the EMC-guidelines 89/336/EEC. EN50081-1:92/-2:93
(interference emission) and EN50082-1:92/-2:95 (interference immunity) for industrial and residential areas. The stricter
requirements have been applied. At present, further standards concerning CE-marking are not relevant for the
IDL 101
.
The
IDL 101
is Labelled with the CE-Sign.
Meaning of the Evaluation Criteria:
A: During tests no functional impairment below documented minimal operating quality
B: After tests no functional impairment below documented minimal operating quality
Minimum Operating Quality
The minimum operating quality of the digital module
IDL 101
is specified through the following criteria:
Continuous test value recording, -processing and -transmission
No unintentional change of status outputs
No unintentional change of status/ counter impulse in the digital inputs
To Next Page
Loading...