Gantner IDL 101 - Page 70

IDL 101
COMMUNICATION
68
HB_IDL101_E_V222.doc
Gantner Instruments Test & Measurement GmbH
Events (b...b) length = 21..840 char
<Year>...............................ASCII.....................................................2 char
<Month> ............................ASCII .....................................................2 char
<Day>................................ASCII.....................................................2 char
<Hour> ..............................ASCII .....................................................2 char
<Minute>............................ASCII .....................................................2 char
<Second>...........................ASCII.....................................................2 char
<Separation mark>..............ASCII (“;“)..............................................1 char
<Average value Channel 1>
2
ASCII.....................................................8 char
<Separation mark>
2
.............ASCII (“;“)..............................................1 char
<Average value Channel 2>
2
ASCII.....................................................8 char
: ....................................... : ..................................................... :
<Separation mark>
2
.............ASCII (“;“)..............................................1 char
<Average value Channel n>
2
ASCII.....................................................8 char
²... The response telegram will only contain these fields if they have been defined.
The transmission of average values and extreme values will be performed by 8 hexadecimal characters in the IEE Std
754 Short Real Format (Example: 50,3094 -> 42 49 3C D3).
Error code (e) length = 1 char
<Error code> ......................ASCII............................................... 1 char
Coding <Error code>:
ASCII "1": Event memory empty
ASCII "2": Momentary access not possible as data are written to the memory
Date and time (t...t) length = 12 char
<Year>...............................ASCII............................................... 2 char
<Month> ............................ASCII ............................................... 2 char
<Day>................................ASCII............................................... 2 char
<Hour> ..............................ASCII ............................................... 2 char
<Minute>............................ASCII ............................................... 2 char
<Second>...........................ASCII............................................... 2 char
Measuring rate and averaging interval (n...n) length = 7 char
<Measuring rate in sec.> .....ASCII ............................................... 2 char
<Averaging interval in sec.>.ASCII ............................................... 5 char