EasyManuals Logo

Gardena SILENO minimo User Manual

Gardena SILENO minimo
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Continue until only a very short section of the wire
remains which is the difference between a solid
green light and a flashing blue light. Then follow
instruction in step 5 below.
4. If indicator lamp still flashes blue in step 3
above: Put L and GUIDE back in their original
positions. Then switch R
and GUIDE. If indicator
lamp now is lit with a solid green light then
disconnect L and connect a new boundary wire to
L. Connect the other end of this new wire at the
middle of the suspected wire section. Follow the
same approach as in 3a) and 3b) above.
5. When the break is found, the damaged section
must be replaced with a new wire. Always use
original couplers.
40 - Troubleshooting 1585 - 002 - 08.12.2020

Other manuals for Gardena SILENO minimo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gardena SILENO minimo and is the answer not in the manual?

Gardena SILENO minimo Specifications

General IconGeneral
TypeRobotic lawn mower
Noise level57 dB
Cutting width160 mm
Grass catcher-
Product colorBlack, Blue
Maximum lawn area250 m²
Maximum cutting height45 mm
Minimum cutting height20 mm
International Protection (IP) codeIPX5
Power sourceBattery
Charging time1.25 h
Power consumption per month (max)2.1 kWh
Weight and Dimensions IconWeight and Dimensions
Depth520 mm
Width340 mm
Height220 mm
Weight6100 g

Related product manuals