Garmin aera 795/796 Pilot’s Guide
190-01194-00 Rev. C
Appendix G
208
OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
Renaming a saved aircraft profile:
1)
From the Main Menu, touch Tools > Profile
2)
Touch the Aircraft Name Button to access a vertical list of saved profiles.
3)
Touch the desired profile from the list.
4)
Touch Menu > Rename
5)
Enter the new Aircraft Name using the keypad, and touch OK.
Deleting a saved aircraft profile:
1)
From the Main Menu, touch Tools > Profile
2)
Touch the Aircraft Name Button to access a vertical list of saved profiles.
3)
Touch the desired profile from the list.
4)
Touch Menu > Delete
5)
Touch Yes.
WEIGHT & BALANCE
Weight & Balance may be used during pre-flight preparations to verify the weight
and balance conditions of the aircraft. By entering the weight and arm values, the aera
795/796 can calculate the total weight, moment, and center of gravity (CG).
Before entering the various figures, the empty weight of the airplane and the arm (or
“station”) for each weight should be determined. These figures should be determined
using the pilot’s operating handbook for the airplane, which also notes the weight
limitations and fore/aft CG limits. Compare those figures to the values calculated by
the aera 795/796.
To perform weight and balance calculations:
1)
From the Main Menu, touch Tools > Weight/Bal
2)
Touch the datafields to enter the desired weights and arms (or “stations”).
The calculated moment, weight, and CG figures appear at the bottom of
the screen. Keep in mind that the “Aircraft” (empty weight/arm) figures
must be entered as a reference to calculate a valid moment, weight, and
CG.
3)
To empty the aircraft, touch Menu > Empty Aircraft.
To Next Page
Loading...
Need help?
General
