Guest Mode
The guest mode feature allows you to limit the features and settings available before sharing the device with a
guest user.
Enabling Guest Mode
1 Select > Guest Mode > Enable.
2 Select an option:
• To enable guest mode and require a code to disable it, select , enter a 4-digit code, and select .
• To enable guest mode without requiring a code, select .
The device limits the settings available for customization.
Disabling Guest Mode
1 Select > Guest Mode > Enable.
2 If necessary, enter the 4-digit code, and select .
NOTE: After three incorrect attempts, you are prompted to enter the universal unlock code: Garmin.
3 Select an option:
• Select to restore the device settings used before guest mode was enabled.
• Select to keep the device settings used while guest was enabled.
System Settings
Select > System.
• Display Settings (Display Settings, page 41)
• Widget Settings (Customizing the Widget Loop, page 42)
• Data Recording Settings (Data Recording Settings, page 42)
• Unit Settings (Changing the Units of Measure, page 42)
• Tone Settings (Turning the Device Tones On and Off, page 42)
• Language Settings (Changing the Device Language, page 42)
Display Settings
Select > System > Display.
Brightness: Sets the backlight brightness.
Backlight Timeout: Sets the length of time before the backlight turns off.
Color Mode: Sets the device to display day or night colors. You can select the Auto option to allow the device to
set day or night colors automatically based on the time of day.
Screen Capture: Allows you to save the image on the device screen when you press .
Using the Backlight
You can tap the touchscreen to turn on the backlight.
NOTE: You can adjust the backlight timeout (Display Settings, page 41).
1 From the home screen or a data screen, swipe down from the top of the screen.
2 Select , and use the slider bar to manually adjust the brightness.
Customizing Your Device 41
To Next Page
Loading...
