Heart Rate Graph: A line graph showing your current, average, and maximum heart rate values for the current
activity.
Heart Rate Zone: The current range of your heart rate (1 to 5). The default zones are based on your user profile
and maximum heart rate (220 minus your age).
Kilojoules: The accumulated work performed (power output) in kilojoules.
Lap Cadence: Cycling. The average cadence for the current lap.
Lap Distance: The distance traveled for the current lap.
Lap Heart Rate: The average heart rate for the current lap.
Lap Power: The average power output for the current lap.
Laps: The number of laps completed for the current activity.
Lap Speed: The average speed for the current lap.
Lap Time: The stopwatch time for the current lap.
Light Mode: The light network configuration mode.
Lights Connected: The number of connected lights.
Max. Power: The top power output for the current activity.
Max. Speed: The top speed for the current activity.
Next Waypoint: The next point on the route. You must be navigating for this data to appear.
Odometer: A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.
Power: The current power output in watts.
Power Graph: A line graph showing your current, average, and maximum power output values for the current
activity.
Power Zone: The current range of power output (1 to 7) based on your FTP or custom settings.
Shifting Advice: The recommendation to shift up or down based on your current effort. Your eBike must be in
manual shifting mode.
Smart Travel Range: The estimated remaining distance the eBike will provide assistance, taking into account
the local terrain.
Speed: The current rate of travel.
Speed Graph: A line graph showing your speed for the current activity.
Sunrise: The time of sunrise based on your GPS position.
Sunset: The time of sunset based on your GPS position.
Temperature: The temperature of the air. Your body temperature affects the temperature sensor.
Time of Day: The time of day based on your current location and time settings (format, time zone, daylight
saving time).
Timer: The stopwatch time for the current activity.
Time to Destination: The estimated time remaining before you reach the destination. You must be navigating
for this data to appear.
Time to Next: The estimated time remaining before you reach the next waypoint in the route. You must be
navigating for this data to appear.
Time to Point: The remaining time to the next point.
Total Ascent: The total elevation distance ascended since the last reset.
Total Descent: The total elevation distance descended since the last reset.
Trainer Controls: During a workout, the resistance force applied by an indoor trainer.
Travel Range: The estimated distance you can travel based on the current eBike settings and remaining battery
power.
54 Appendix
To Next Page
Loading...
