Deleting an Alarm
1 From the watch face, hold UP.
2 Select Alarm Clock.
3 Select an alarm.
4 Select Delete.
Starting the Countdown Timer
1 From any screen, hold LIGHT.
2 Select Timer.
3 Enter the time.
4 If necessary, select an option:
• Select > Restart > On to automatically restart the timer after it expires.
• Select > Sounds, and select a type of notification.
5 Select .
Using the Stopwatch
1 From any screen, hold LIGHT.
2 Select Stopwatch.
3 Select START to start the timer.
4 Select BACK to restart the lap timer .
The total stopwatch time continues running.
5 Select START to stop both timers.
6 Select an option.
7 Save the recorded time as an activity in your history (optional).
Syncing the Time with GPS
Each time you turn on the device and acquire satellites, the device automatically detects your time zones and
the current time of day. You can also manually sync the time with GPS when you change time zones, and to
update for daylight saving time.
1 From the watch face, hold UP.
2 Select > System > Time > Sync with GPS.
3 Wait while the device locates satellites (Acquiring Satellite Signals, page 49).
Customizing Your Device 45
To Next Page
Loading...
