EasyManuals Logo

Garmin FORERUNNER 965 User Manual

Garmin FORERUNNER 965
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Setting Your Heart Rate Zones
The watch uses your user profile information from the initial setup to determine your default heart rate zones.
You can set separate heart rate zones for sport profiles, such as running, cycling, and swimming. For the most
accurate calorie data during your activity, set your maximum heart rate. You can also set each heart rate zone
and enter your resting heart rate manually. You can manually adjust your zones on the watch or using your
Garmin Connect account.
1 Hold .
2 Select User Profile > Heart Rate & Power Zones > Heart Rate.
3 Select Max. Heart Rate, and enter your maximum heart rate.
You can use the Auto Detection feature to automatically record your maximum heart rate during an activity
(Detecting Performance Measurements Automatically, page88).
4 Select LTHR, and enter your lactate threshold heart rate.
You can perform a guided test to estimate your lactate threshold (Lactate Threshold, page34). You can
use the Auto Detection feature to automatically record your lactate threshold during an activity (Detecting
Performance Measurements Automatically, page88).
5 Select Resting HR > Set Custom, and enter your resting heart rate.
You can use the average resting heart rate measured by your watch, or you can set a custom resting heart
rate.
6 Select Zones > Based On.
7 Select an option:
Select BPM to view and edit the zones in beats per minute.
Select %Max. HR to view and edit the zones as a percentage of your maximum heart rate.
Select %HRR to view and edit the zones as a percentage of your heart rate reserve (maximum heart rate
minus resting heart rate).
Select %LTHR to view and edit the zones as a percentage of your lactate threshold heart rate.
8 Select a zone, and enter a value for each zone.
9 Select Sport Heart Rate, and select a sport profile to add separate heart rate zones (optional).
10 Repeat the steps to add sport heart rate zones (optional).
Letting the Watch Set Your Heart Rate Zones
The default settings allow the watch to detect your maximum heart rate and set your heart rate zones as a
percentage of your maximum heart rate.
Verify that your user profile settings are accurate (Setting Up Your User Profile, page85).
Run often with the wrist or chest heart rate monitor.
Try a few heart rate training plans, available from your Garmin Connect account.
View your heart rate trends and time in zones using your Garmin Connect account.
User Profile 87

Table of Contents

Questions and Answers:

Garmin FORERUNNER 965 Specifications

General IconGeneral
Display typeDigital
Display diagonal1.4 \
Display diameter35.4 mm
Watch glass typeCorning Gorilla Glass 3 DX
Display resolution454 x 454 pixels
Display technologyAMOLED
ShapeRound
Band sizeOne Size
Closure typeSingle prong strap buckle
Band materialSilicone
Lens materialGlass
Watch case size47 mm
Suggested genderUnisex
Watch case colorWhite
Water resistance5 ATM
Wrist size range135 - 205 mm
Market positioningSmartwatch
Watch case materialTitanium
Maximum strap length205 mm
Minimum strap length135 mm
Flash memory32 GB
Built-in cameraNo
Built-in microphone-
Clock mode12h/24h
Heart rate measuringAutomatic, Manual
Heart rate sensor typeOptical
Supported applicationsGarmin Connect
Distance system of measurementMetric
Cables includedUSB
Battery life23 day(s)
Battery typeBuilt-in battery
Battery capacity- mAh
Battery life (max)31 h
Continuous audio playback time8.5 h
Headphone connectivityBluetooth
Weight and Dimensions IconWeight and Dimensions
Depth13.2 mm
Width47.2 mm
Weight53 g

Related product manuals