Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A
26
Nav/Com/XPDR/Audio Panel
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSFMS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
4)
Touch the Play Button ( ) to play the latest recorded memory block.
The Stop Button ( ) is displayed while the audio is playing. Touch the
Stop Button during play of a memory block to stop play. When the present
memory block has finished playing the Play Button is displayed again.
5)
Touch the Previous Button ( ) to play the previously recorded memory
block. Each subsequent press of the Previous Button selects the previously
recorded memory block, if any exist.
6)
Touch the Next Button ( ) to play the next recorded memory block. Each
subsequent press of the Next Button selects the next recorded memory
block, if any more exist.
ENTERTAINMENT INPUTS
The pilot can select each of the entertainment inputs independently. The copilot
and passengers can also select each entertainment independently if not synchronized
to the pilot. If the copilot and/or passengers are synchronized to the pilot, they will
hear the entertainment inputs the pilot has selected at the volume level the pilot has
selected. Sync to Pilot does not synchronize the copilot or passenger settings for Music
1 or Music 2 mute, and Clicks.
Selecting/deselecting MUSIC1/MUSIC2 input:
1)
Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2)
If necessary, touch the Copilot Tab or the Pass Tab.
3)
If necessary, touch the Sync to Pilot Button to disable synchronizing
selections to the pilot.
4)
Scroll the list to find Music1 or Music2.
5)
Touch the Music1 or Music2 Button to enable/disable (green indicates
enabled) the Music1/Music2 input for the selected position (pilot, copilot, or
passengers).
Configuring Music1/Music2 Mute Settings:
1)
Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2)
If necessary, touch the Copilot Tab or the Pass Tab.
3)
If necessary, touch the Sync to Pilot Button to disable synchronizing
selections to the pilot.
To Next Page
Loading...
Need help?
General
