G900X/G950 Installation and Maintenance Manual – Airframe Specific Installation Instructions (G900X Only) Page B-17
190-00719-00 Revision D
B.3 Lancair Aircraft
B.3.1 Typical Panel/System Rack Guidance (IV/IV-P/ES/ES-P/Legacy)
NOTE
Refer to Section 1 for general guidance on the mechanical aspects of the G900X/G950.
A typical installation consists of one System Rack (115-00413-00) and one Truncated System Rack
(115-00635-00), as shown in Figure B-15. The truncated rack is available for applications where a glare
shield or other obstruction interferes with the upper corner of a standard system rack.
Figure B-15. Typical System Rack Assembly
If the above system racks are utilized all the LRUs for the G900X/G950 system (including cooling) fans
can be arranged to fit as illustrated in the typical system rack LRU installation drawing shown in Figure
B-16.
Figure B-16. Typical System Rack Assembly With LRU Racks
To Next Page
