8 GPSMAP
®
4000/5000 Series Owner’s Manual
Charts and 3D Chart Views
5. Complete an action:
• Select to display the name and symbol.
• Select to display any comments you have added.
• Select to display only the symbol.
• Select to hide the symbol.
Setting the Color of the Active Track
See (page 37).
Showing or Hiding Colored Tracks
You can specify the color of tracks (page 37) and then show or hide all tracks of that color.
1. From the Home screen, select .
2. Select , , or
3. Select > > .
4. Select a color to show or hide all tracks of that color.
Viewing Location and Object Information on a Chart
You can view information about a location or an object on the Navigation Chart or the Fishing Chart.
: The Fishing Chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select .
2. Select , or .
3. Select a location or an object.
A list of options appears along the right side of the chart. The options that appear vary based on the
location or object you selected.
4. Complete an action:
• Select to view details of objects in the vicinity of the cursor. ( does not appear if the
cursor is not near an object. If the cursor is near only one object, the name of the object appears.)
• Select to navigate to the selected location (page 6).
• Select to mark a waypoint at the cursor location.
• Select to view the distance and bearing of the object from your current location.
The information appears in the upper-left corner of the screen. Select to measure from a
location other than your current location.
• Select to view tide (page 42), current (page 43), celestial (page 44), chart notes, or local
services information near the cursor.
• Select to remove the pointer from the screen. Select to stop panning and
return the screen to your present location.
To Next Page
Loading...
Need help?
General