40
Appendix
System Interfaces
Navigation Receiver
The SL30 can be installed in several configurations based upon individual requirements. This
includes with or without an external course deviation indicator. The CDI may be discrete,
serial, or composite.
Com Transceiver
For standalone installations, the Com requires connections to:
• a standard Com antenna
• a microphone (or microphones)
• a speaker or headphone
• power input
These items may be installed dedicated to the SL30 Com, or by connection to an audio panel.
The system can be configured to mix the NAV audio with the Com audio if no external audio
panel is used.
Serial Interface
DST or DME – Distance, Speed, Time or Distance Measure Equipment
SL/GX – GPS products
MX – Multi-Function Display
To Next Page
Loading...
