GARO GLB - Limit Charging Current; Connect Charger to a Local Network Via Wi-Fi

40 41
ENEN
GLB WIFI Master only GLB WIFI Master only
Limit charging current
The charging current can be temporarily reduced during a specific period via the web
interface.
Limitation of charging current carried out on the printed circuit board through
SW2(DIP 1–4) is still active and superordinate.
A. Limitation of charging current.
B. Limitation of charging current for a fixed period.
A
B
Connect charger to a local network via Wi-Fi
The wallbox will attempt to connect to the specified Wi-Fi network. If the data entered is
incorrect or the connection is unsuccessful for any other reason, the device will return to
access point mode after around 10 minutes.
A
B
C
D
GLB WIFI Master / Limit charging current GLB WIFI Master / Connect charger to a local network via Wi-Fi
(figure 30)
(figure 31)
A. Choose to connect via router.
B. Enter your network name/SSID.
C. Enter your network password.
D. Press save.