Decoding Model Types
There are many different ways for you to determine which model CartManager you are working on and or ordering parts for.
Differentiating CartManager model types from outside.
CartManager HD and SD Models - the key switch will be located by your waist area.
CartManager HD models will have a
Truecharge Battery Discharge Indicator
(BDI), which is rectangle in shape and
has three red, four yellow and three
green LED’s from left to right.
CartManager SD models will have a 2
¼ inch round digital BDI gauge with an
LED under each symbol.
CartManager XD Models - XD, XD+, XDW and XDWi - the key switch will be located down by your right knee.
CartManager XDW models will
have a single LED between the
key switch and the BDI.
CartManager XD+ models will
have a 2 ¼ inch round digital BDI
gauge with an LED under each
symbol.
CartManager XD & XDWi models
will have a key switch and a BDI
only. To differentiate between the
XD and XDWi look at the
electronic board differentiation as
detailed below.
Key switch
To Next Page
Loading...
Need help?
General
