Gatekeeper Systems CartManager XD+ Field Technician Guide

10. Apply a small amount of low strength Loctite
on two pan head screws 6-32 x 5/8
(0145353) and secure the flat antenna to
the lower arm cover. DO NOT over tighten.
Slide back the lower arm cover in its place.
Secure the coaxial cable inside the upper
arm cover. Make sure there are no wires
touching any moving parts.
11. Screw back the upper arm cover to its original
place.
Antenna cable

Gatekeeper Systems CartManager XD+ Specifications

General

Brand	Gatekeeper Systems
Model	CartManager XD+
Category	Utility Vehicle
Language	English