214
Chapter 13: Maintaining Your Computer
www.gateway.com
Creating an emergency startup
diskette
An emergency startup diskette is a diskette that contains critical information that
you need to start your computer if Windows fails to start. You should create a
startup diskette as soon as you get your computer.
To create an emergency startup diskette in Windows XP:
1 Insert a blank diskette labeled Startup into the diskette drive.
2 Click Start, then click My Computer. The My Computer window opens.
3 Right-click 3½ Floppy (A:), then click Format. The Format 3½ Floppy (A:)
dialog box opens.
Important If the diskette drive is not in the modular bay, you need to
swap modules. For more information about swapping
modules, see “Changing drives” on page 246.
To Next Page
Loading...
Need help?
General
