244
Chapter 15: Upgrading Your Notebook
www.gateway.com
Adding and removing a PC Card
Your notebook has a two PC Card slots (also known as a PCMCIA card slots).
These slots accept two Type II cards or one Type III card.
You do not need to restart your notebook when changing most cards because
your notebook supports hot-swapping. Hot-swapping means that you can insert
a PC Card while your notebook is running. If your PC Card does not work after
hot-swapping, see the PC Card manufacturer’s documentation for further
information.
To insert a PC Card:
â– Push the card firmly into the PC Card slot label-side up until the outer edge
of the card is flush with the side of your notebook.
To Next Page
Loading...
Need help?
General
