16
Chapter 2: Setting Up Your Player
www.gateway.com
■ Progressive/component video
For best video quality, connect one end of each component video
cable (not included) to the
PROGRESSIVE/COMPONENT Cb/Pb, Y,
and
Cr/Pr jacks on the back of the player, then connect the other ends
to the corresponding color-coded jacks on your TV.
3 Connect your player to your audio system in one of four ways:
■ 2-channel audio (stereo)
Connect one end of the included red and white audio/video cables
to the 2 CH. AUDIO R and L jacks on the back of the player, then
connect the other ends to the right/left audio jacks on your TV, stereo,
or 2-channel analog amplifier.
■ 5.1-channel surround analog audio
Connect one end of the six audio cables (not included) to the
5.1 CHANNEL CENTER, SUR.(R), FRONT(R), SUB W., SUR(L), and
FRONT(L) jacks on the back of the player, then connect the other ends
to the corresponding analog audio jacks of your 5.1-channel amplifier.
2 Ch. R (right stereo)
(surround sound front right)
5.1 channel sur.(R) (surround
sound right)
5.1 channel center
surround sound center)
5.1 channel sub w.
(surround sound subwoofer)
5.1 channel sur.(L) (surround
sound left)
5.1 channel front(L)
(surround sound front left)
2 Ch. L (left stereo)
Coaxial (digital audio)
Optical digital audio
To Next Page
Loading...