42
Chapter 3: Customizing
www.gateway.com
3 Highlight DTS, then press the buttons to select:
■ Bitstream
Outputs raw 5.1-channel digital signals from the optical or coaxial
digital audio jacks. Use this setting when the player is connected to
an external amplifier with a DTS decoder.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital
audio jacks.
■ Off
Turns off DTS output.
4 Highlight OK, then press ENTER.
Configuring MP3 audio
This option sets the outgoing digital audio format of MP3 tracks.
To set your MP3 output format:
1 On the player’s remote control, press STOP, then press SETUP. The main
Setup menu opens.
2 Use your remote control’s arrow buttons to highlight Digital, then press
ENTER. The Digital audio setup menu appears.
To Next Page
Loading...