24
Chapter 2: Setting Up Your Player
www.gateway.com
7 Highlight Security, then use the buttons to choose one of the following
options:
■ Disabled (recommended)
■ 64 bit Key — Check your wireless network’s documentation to confirm
this setting.
■ 128 bit Key — Check your wireless network’s documentation to confirm
this setting.
8 Highlight OK, then press ENTER. Network setup is complete.
9 Press SETUP or RETURN to close the Setup menu.
10 Go to “Customizing” on page 35 for instructions on customizing your
player’s other settings.
Wireless peer-to-peer setup
To configure the player for a wireless peer-to-peer network:
1 Make sure that your computer is on and Media Server is running.
The Media Server icon in the Windows taskbar shows that the program
is running.
If the Media Server icon has a red “x” on it, Media Server is running but
cannot connect to the network. See “Network troubleshooting” on
page 81.
Important Wireless network cards used in a peer-to-peer network
must be set to ad hoc mode instead of infrastructure mode.
For more information, see your network card’s
documentation.
To Next Page
Loading...